BTMMW - B-I-N PRIMER SEALER, WZ0900
- MSDS: BTMMW
- Manufacturer: WILLIAM ZINSSER AND CO INC
- Product Name: B-I-N PRIMER SEALER, WZ0900
- National Stock Number: 8010-00N045915
Product Identification
Product ID:B-I-N PRIMER SEALER, WZ0900
MSDS Date:01/09/1992
FSC:8010
NIIN:00N045915
MSDS Number: BTMMW
Responsible Party
SOMERSET, NJ 08875
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 908-469-4367
Preparer: L. MICHALEWICZ
Cage: FO649
Contractor
Telephone: (201) 469-8100
Cage: 3M602
Ingredients
METHANOL; (METHYL ALCOHOL)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: 21%
OSHA PEL 200PPM;250PPM STEL,S
ACGIH TLV: 200PPM;250PPM STEL,S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SILICATE, MICA; (< 1% CRYSTALLINE SILICA)
CAS: 12001-26-2
RTECS: VV8760000
Fraction By Weight: <5%
OSHA PEL 3 MG/M3 RDUST
ACGIH TLV: 3 MG/M3 RDUST
CLAY (KAOLIN); (ALUMINA SILICATE)
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 10%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 5 MG/M3 TDUST
SODIUM ALUMINO SILICATE; (SILICATE)
CAS: 1344-00-9
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 15%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
COATING 5.32 LBS/IMP GAL. 4.43
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
5.07 LBS/IMP GAL. 4.22 LBS/US
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
ETHYL ALCOHOL
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 35%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
ISOPROPYL ALCOHOL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 6%
OSHA PEL 400 PPM;500 STEL
ACGIH TLV: 400 PPM;500 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: PROLONGED AND REPEATED
EXPOSURE WILL HAVE SAME EFFECTS AS WILL ANY SOURCE OF ALCOHOL.
INTENTIONAL MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE
HARMFUL. INHAL: HIGH CONC OF VAP MAY CA USE HDCH, DROW, DIZZ, NAUS
& RESP IRRIT. SKIN/EYE: LIQ/VAP MAY CAUSE IRRIT. SKIN ABSORP: MAY
CAUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: DEFAT OF SKIN ON PROLONGED CONTACT.
INGEST: CAN CAUSE DEPRESS OF CNS, NAUS, VOMITING AND DIARRHEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE AND
RESPIRATORY CONDITIONS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:INHAL: MOVE TO FRESH AIR IMMED. IF PERSON HAS STOPPED BRTHG
GIVE ARTF RESP. EYE: FLUSH IMMED W/PLENTY OF COOL WATER FOR @ LST
15 MIN. SKIN: REMOVE ANY CONTAMD CLTHG, WASH BEFORE REUSE. WASH
W/COOL WAT ER FOR @ LST 15 MIN. INGEST: GIVE PERSON WATER/MILK TO
DILUTE. CALL A PHYS/POIS CTL CTR. IF CNDTNS OF EXPOS PERSIST/VICTIM
IS UNCON CALL A PHYS/SEEK MED ATTN IMMED.
Fire Fighting
Flash Point Method:SCC
Flash Point:60.0F,15.6C
Lower Limits:3.3%
Upper Limits:195
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED WITH EXTREME HEAT. IMPACT MAY PUNCTURE CONTAINER OR LOOSEN
LID. DRUM MUST BE GROUNDED AND BONDED WHEN POURING.
Accidental Release
Spill Release Procedures:STOP LEAKAGE IF NO RISK IS EVIDENT. ABSORB
SMALL SPILLS WITH AN APPROPRIATE ABSORBENT MATERIAL. DIKE LARGE
SPILLS. WEAR APPROPRIATE PROTECTIVE EQUIPMENT AND RESPIRATORS.
REPORT LARGE SPILLS AS APPLICA BLE LAWS REQUIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:FOLLOW NFPA 30 FLAMM & COMBUST LIQ
CODES FOR STOR & HNDLG. CONSULT APPLIC LAWS. STORE IN A COOL PLACE.
KEEP AWAY FROM OPEN FLAME, HEAT & SPARKS.
Other Precautions:ISOLATE FROM OXIDIZERS. AVOID BREATHING VAPOR/SPRAY
MIST. USE ONLY W/ADEQUATE VENTILATION. DO NOT TAKE INTERNALLY. USE
ONLY GROUNDED AND EXPLOSION PROOF EQUIPMENT. EMPTY CONTAINERS WITH
LIQUID RESIDUE OR VAPORS ARE FLAMMABLE.
Exposure Controls
Respiratory Protection:USE AN APPROP NIOSH/MSHA APPRVD RESP WHEN
VAP/MIST LEVELS ARE ABOVE ALLOWABLE EXPOS LIM. MAKE SURE RESP
EQUIPMENT IS PROPERLY FITTED. FOLLOW MFR'S RECOMM USE AND HANDLING
PROC.
Ventilation:USE ONLY EXPLO PROOF EXHST EQUIP. EXHAUST ONLY INTO NON-
EXPLOS AREAS. MAINTAIN VAP CONC BELOW ALLOWABLE EXPOS LIM.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:PROTECT SKIN WITH APPROPRIATE CLOTHING.
Work Hygienic Practices:WASH HANDS AND EXPOSED AREAS AFTER USED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:173F,78C
Vapor Density:LTR/AIR
Spec Gravity:1.2(H2O=1)
Evaporation Rate & Reference:
Appearance and Odor:WHITE LIQUID, ALCOHOL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, ACIDS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE ON INCOMPLETE
COMBUSTION.
Disposal
Waste Disposal Methods:REFER TO APPLIC LAWS GOVERNING WASTE DISP &/OR
RECLAMATION OF RECOVERED MATL. PLACE ALL RECOVERED MATL INTO
PROPERLY MARKED CONTRS FOR DISP &/OR TRANSPORTATION. DRIED SHELLAC
IS NON-HAZ. DISPOSE OF I/ A/W FED, ST & LOC REGS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.